Fault-Tracing Information

Fault-tracing

Select an alternative
- If the diagnostic trouble code (DTC) is permanent: Select alternative 1.
- If the diagnostic trouble code (DTC) is intermittent: Select alternative 2.

Select an alternative.

1 - Checking components and connections

2 - Intermittent fault

-------------------------------------------------

Intermittent fault




- The fault has been remedied.

Continue - Fault-tracing information

-------------------------------------------------

Checking components and connections




- Ignition off, wait for 15 seconds.
The control module has registered an internal fault in the software.
- Download new software to the supplemental restraint system module (SRS).
If the fault persists after reprogramming the supplemental restraint system module (SRS):
- Replace the supplemental restraint system module (SRS).
Remedy as necessary.

Other information

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Select an alternative

-------------------------------------------------