Fault-Tracing Information

Fault-tracing

Reloading software in the control module
The control module has registered an internal fault in the software.
Select the tab Software and reprogram the control module with the latest software.
If the problem remains after software download, try replacing the Closing velocity module (CVM).

Continue - Information

-------------------------------------------------

Information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Reloading software in the control module

-------------------------------------------------