Fault-Tracing Information

Fault-tracing

Checking communication
The diagnostic trouble code indicates that the Brake control module (BCM) and Transmission Control Module (TCM) gives incorrect information about the vehicle speed to the Central electronic module (CEM).
Fault trace the Brake control module (BCM) and Transmission Control Module (TCM).
Remedy as necessary.

Other information
- For further information, see the wiring diagram.
- Checking wiring and terminals Checking Wiring and Terminals

Continue - Verification

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking communication

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair check that the fault has been remedied.




- Reinstall the connectors, components etc.
- Switch on the ignition. Wait 10 seconds.
Read diagnostic trouble codes by clicking the VCT2000 symbol.
If the fault is intermittent, the fault has been remedied.





Is the fault intermittent?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Fault-tracing information

VERIFIED - VERIFIED

-------------------------------------------------