Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P240200

Condition




The engine control module (ECM) checks the control signal to the leakage diagnosis pump.
The diagnostic trouble code is generated if the control module registers a fault in the control signal to the leakage diagnosis pump.
The diagnostic trouble code can be diagnosed when the ignition is on.

Substitute value
- Leakage diagnosis interrupted.

Possible source
- The signal cable is short-circuited to supply voltage
- Damage leakage diagnosis pump.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.