Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P052548

Condition
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers an internal fault when the cruise control is active.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Hint: If Engine control module (ECM) has been recharged or if the battery voltage has been interrupted, the brake pedal must be pressed down twice for approx. two seconds to activate the cruise control function.





Substitute value
- Cruise control is disengaged when the fault is active.

Possible source
- Damaged engine control module (ECM).

Fault symptom[s]
- Cruise control does not operate