Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P011629

Condition




The engine control module (ECM) monitors the engine temperature using a sensor.
If the control module detects that the value from the engine temperature sensor does not change during engine warm-up phase, the diagnostic trouble code is generated.
The control module's for the diagnostic trouble code starts when the calculated engine temperature has increased by 20 °C and the fuel temperature by 5 °C since engine start, but only if the fuel temperature has dropped by at least 5 °C since the end of the previous driving cycle.

Substitute value
- An estimated temperature value is used.

Possible source
- Contact resistance in connector.
- Damaged engine coolant temperature sensor.

Fault symptom[s]
- Warning lights and chimes/Malfunction Indicator Light ("Check engine" light) indication/no indication