Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-C200307

Condition
The central electronic module (CEM) checks the signal from the Steering wheel switch left (SWSL).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Some of the buttons have been activated for more than 180 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- One or more function buttons are stuck in the pressed-in position.

Fault symptom[s]
- Cruise control does not operate