Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-C10014A

Condition
Forward Sensing Module (FSM) checks internal components in control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The camera has an incorrect version number.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on for at least 30 seconds.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The camera has a version number which is not compatible with the system.

Fault symptom[s]
- Text window and warning symbol/Text message
- Warning lights and chimes/Front monitoring/Active safety indication/no indication
- Warning lights and chimes/Bulb failure indication/no indication
- Front monitoring/Active safety/Driver Alert Control does not work
- Brake pedal/Excessive "brake pedal effort" required
- Front monitoring/Active safety/Lane Departure Warning does not work