Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-C006A16

Condition
The Body sensor cluster stability sensor (BSC) provides the Brake control module (BCM) with information about the lateral movement of the vehicle and the lateral and forward acceleration. The Body sensor cluster stability sensor (BSC) is supplied with 12 V.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The power supply to the sensor is below 6.5 V ± 0.5 V.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Traction control (TC) blocked.
- Stability control (SC) blocked.
- Active yaw control (AYC) is blocked.

Hint: Brake system, abbreviations Brake System, Abbreviations

Possible source
- Short-circuit to ground in the power supply cable.
- Internal fault in the body sensor cluster (BSC).

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- Anti-spin warning lamp lit
- Stability function is not working
- Traction control not working
- Anti skid function is not working
- Adaptive cruise control; No Functionality
- Collision avoidance driver support; No Functionality
- Front monitoring/Active safety/City Safety does not work