Fault-Tracing Information

Fault-tracing

Checking the component
- Ignition off.
Check that the body sensor cluster (BSC) is securely installed on the bracket under the passenger seat. Check that the bracket is not bent or damaged in any other way.
If the diagnostic trouble code (DTC) recurs, replace the Body sensor cluster stability sensor (BSC).
Remedy as necessary.

Other information
- Accelerometer and yaw angle sensor Service and Repair





Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reconnect the connectors, reinstall components etc.
- Test drive the vehicle following:
- Ignition on.
Read off the status of the diagnostic trouble code (DTC).





Is the status of the diagnostic trouble code (DTC) intermittent?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the component

-------------------------------------------------