Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TVM-B1D5811

Condition
The Television Module (TVM) checks the signal on the signal cable (CVBS) to the screen in Rear seat entertainment module (RSE).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal is too low in the signal cable (CVBS) to the screen in Rear seat entertainment module (RSE).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated control module.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuiting to ground on signal cable (CVBS) between the control module and the screen in Rear seat entertainment module (RSE).

Fault symptom[s]
- TV/Does not work