Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSM-B1B8724

Condition
Motor 3 controls the height of the rear edge of the seat.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- No hall sensor pulse at activated motor.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Motor 3 activated.
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Damaged hall sensor in engine 3.
- Short-circuit to supply voltage in the signal cable.

Fault symptom[s]
- Automatic adjustment of power seat/outer mirror does not work