Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CCM-1B7111

Condition
Climate control module (CCM) checks the status of temperature sensor evaporator.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal from the temperature sensor evaporator is low.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.





Substitute value
- None.

Possible source
- Temperature sensor evaporator is short-circuited to ground.

Fault symptom[s]
- Cabin temperature does not correspond to value set