Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The external rear-view mirrors may be equipped with a motor for folding in the mirror housing. The door mirror motors are operated via the control panel in the driver's door.
The Passenger door module (PDM) supplies voltage to the motors in the external rear-view mirror on the vehicle's passenger side.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal too low from the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Operating door mirrors.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the power supply cable.

Fault symptom[s]
- Outer door mirror adjustment not working