Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CCM-B1A6115

Condition
Climate control module (CCM) checks the status of the passenger compartment temperature sensor.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal from passenger compartment sensor is high.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.





Substitute value
- None.

Possible source
- Open circuit on the signal line between the in-vehicle temperature sensor and climate control system (CCM), or the signal line is short-circuited to voltage.

Fault symptom[s]
- Cabin temperature does not correspond to value set