Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DDM-B11F615

Condition
Driver door module (DDM) supplies voltage to the motor for the electrically foldable rear-view mirror on the driver side.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal is too high.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated function.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cable.
- Open-circuit in the signal cable.

Fault symptom[s]
- Door mirrors/Folding does not work