Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-B11A195

Condition
The Supplemental restraint system module (SRS) checks the circuit to the pressure sensor, right.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal is short-circuited to adjacent signal on the connector.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position II and III. Only during start-up of the supplemental restraint system.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None

Possible source
- The sensor's connector is installed incorrectly.

Fault symptom[s]
- Warning lights and chimes/Supplemental Restraint System (SRS) indication/no indication
- Text window and warning symbol/Text message