Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The control module in the left-hand front door communicates with the Left Camera Module (LCM) via LIN communication.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- There is an open-circuit in the LED power supply cable.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Open-circuit in the power supply cable.

Fault symptom[s]
- LED does not light
- Message in information display