Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DIM-B115C71

Condition
The Driver information module (DIM) is continuously supplied with information about the current fuel level.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The diagnostic trouble code (DTC) is stored if the driver information module (DIM) detects that the fuel gauge display has not changed for approximately 5 minutes of driving.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Fuel level sensor has jammed.

Fault symptom[s]
- Fuel gage not operating