Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B113007

Condition
Central electronic module (CEM) is continuously supplied with necessary information from Light switch module (LSM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- One of the buttons on Light switch module (LSM) has been activated for more than 60 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- One or more function buttons are stuck in the pressed-in position.
- Damaged Light switch module (LSM).

Fault symptom[s]
- Light switch not working