Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B10AC95

Condition
Central electronic module (CEM) checks if the vehicle shall be equipped with cruise control according to the vehicle configuration file. Depending on the model and equipment, the vehicle can be configured in different ways.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The configuration is incorrect.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- The vehicle's configuration is incorrect.
- A control module or function has been removed from or added to the vehicle without correctly updating the vehicle configuration.

Fault symptom[s]
- Cruise control does not operate