Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ICM-B104C23

Condition
The Infotainment control module (ICM) checks whether the YES button has jammed.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The YES button has been active for more than 2 minutes.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The YES button has jammed in the held in position.

Fault symptom[s]
- Audio other/Steering wheel audio controls do not work