Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ICM-B10108F

Condition
The Infotainment control module (ICM) communicates with the front parking assistance camera via a composite video signal (CVBS).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Faulty video signal.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Self-test

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Incorrect synchronization signal between composite video input (CVBS) and the control module.
- Loose connection at the composite video cable's (CVBS) connection to the control module.
- Damaged cable between the control module and composite video input (CVBS).

Fault symptom[s]
- Video other/Other video problems
- Video other/Front screen, poor image quality/no image
- Front monitoring/Active safety/No/reduced/incorrect function/Parking Assistance Camera