Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-B009964

Condition
The roll-over sensor is used to give the Supplemental Restraint System Module (SRS) information prior to a roll-over. The Supplemental restraint system module (SRS) checks the circuit to the roll-over sensor.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The control module's configuration does not correspond with the vehicle's vehicle configuration.
- Incorrect value runs longer than 2.5 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position II and III. Only during start-up of the supplemental restraint system.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Incorrect software in the Supplemental restraint system module (SRS).

Fault symptom[s]
- Warning lights and chimes/Supplemental Restraint System (SRS) indication/no indication
- Text window and warning symbol/Yellow symbol and text message