Procedures
Decor panel, center stack
INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
Decor panel, center stack
- Set the ignition key to position 0.
Note! Wait at least one minute before unplugging the connectors or removing other electrical equipment.
- Remove the panel.
- Unplug the connector.
- Remove the screws.
- Remove the screws.
Applies to cars with an automatic transmission
Applies to all models
- Remove the panel.
- Fold the carpet to one side.
- Unhook the clip(s).
- Unplug the connector.
Applies to cars with Four-C (active chassis)
- Unplug the connector.
Applies to all models
- Protect adjacent components with tape.
- Unplug the connector.
- Remove the screws.
Applies to cars with Four-C (active chassis)
- Remove the component carefully.
Applies to all models
Applies to cars with Four-C (active chassis)
Applies to all models
- Reinstall the screws.
- Plug in the connector.
- Unplug the connector.
- Remove the screws.
- Reinstall the screws.
- Plug in the connector.
- Unplug the connector.
- Remove the screws.
- Reinstall the screws.
- Plug in the connector.
- Repeat all method steps for the other side.