Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

The Engine Control Module (ECM) monitors the engine's speed. If the control module detects that the engine rpm has been outside the limit value for engine stop, the diagnostic trouble code is generated.
The diagnostic trouble code (DTC) can be diagnosed at key position II.

Substitute value
- Nothing.

Possible source
- This diagnostic trouble code (DTC) is not caused by a fault that needs to be remedied.
- Overloaded engine.

Fault symptom[s]
- None.