Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P250A13

Condition




The Engine control module (ECM) checks the signal from the oil level sensor. The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that the signal from the oil level sensor is incorrect.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running.

Substitute value
- None.

Possible source
- Contact resistance, oxidation or poor contact in connections.
- Open-circuit in the signal cable
- Open-circuit in the power supply
- Water in the oil.
- Damaged oil level sensor.

Fault symptom[s]
- Warning lights and chimes/Oil pressure indication/no indication