Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition





Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

The diagnostic trouble code (DTC) is stored if the engine control module (ECM), via the controller area network (CAN), receives a fault message from the central electronic module (CEM) indicating that the analog signal from the accelerator pedal (AP) position sensor is faulty or that there is a fault in the CAN communication.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running.

Substitute value
None.

Possible source
- This diagnostic trouble code is not caused by a fault that requires remedial action, as long as it has not been stored with another diagnostic trouble code.
- Fault-trace the central electronic module (CEM).

Fault symptom[s]
- None.