Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P068600

Condition




The engine control module (ECM) checks the system relay.
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) detects that the voltage on the signal cable for the system relay is lower than a certain value.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Open-circuit in the signal cable
- Damaged system relay.

Fault symptom[s]
- Starting/Engine does not start/Engine does not turn/No clicking sound at start attempt
- Starting/Engine does not start/Unsure when/at all times