Fault-Tracing Information

Fault-tracing

Checking the wiring




- Ignition off.
Check connections and cables between the engine control module (ECM) and starter relay for open circuits and loose connections.
If no fault is found, try a new starter relay.

Other information
- Checking wiring and terminals Checking Wiring and Terminals. Permanent Faults

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the wiring

FAULT FOUND - DONE

-------------------------------------------------