Fault-Tracing Information

Fault-tracing

Checking the components and wiring




- Ignition off.
- Check the connectors. Check for loose connections. Check for contact resistance. Check for oxidation.
Check the signal cable. Check for an open-circuit. Check for a short-circuit to ground.
Take readings between:
- Engine Control Module (ECM) #B9 (#C9) and starter motor relay #2.
Remedy as necessary.

Other information
- Connecting the breakout box, B5254T5 Connecting the Breakout Box, Engine Control Module (ECM)
- Signal specification, B5254T5 Signal Specification, Engine Control Module (ECM)
- For further information about the fuses and relays, see the Wiring Diagram.
- Checking wiring and terminals Checking Wiring and Terminals. Permanent Faults





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the components and wiring

FAULT FOUND - DONE

-------------------------------------------------