Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P007284

Condition




The engine control module (ECM) checks the signal from the outside temperature sensor. The control module compares the signal to the operating range of the sensor.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal from the outside temperature sensor is too low.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Substitute value
Predefined value used.

Possible source
- Damaged outside temperature sensor
- Short-circuit to ground in the signal cable.
- Open-circuit in the signal cable.

Fault symptom[s]
- Outside temperature gauge not functioning
- Displays too low ambient temperature