Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P000B00

Condition




The engine control module (ECM) checks that control of the exhaust camshaft is quick enough. This means that the exhaust camshaft (actual value) reaches the position requested by the engine control module (ECM) quickly enough. The diagnostic trouble code (DTC) is stored if the requested position is not reached within a certain time.
The diagnostic trouble code (DTC) can be diagnosed while the engine is running and while camshaft control is active.

Substitute value
None.

Possible source
- Low oil pressure
- Poor oil quality
- Damaged reset valve
- Mechanical fault in the variable valve timing (VVT) unit.

Fault symptom[s]
- Malfunction indicator light (MIL), on
- Starting/Engine hard to start/cranks slowly/Unsure when/at all times
- Driving/Poor performance/lacks power
- Driving/Hesitates/surges/Unsure when/at all times