Checking the Fuel Pump (FP)

Checking the fuel pump (FP)

Fault-tracing
If the customer has problems with the fuel pump not working, the problem may be due to a failed terminal, #C2:76, on Central electronic module (CEM).
Using a loose male connector, test to see if the female connector provides a good contact and that the pin remains in place when the male connector is pulled lightly
If female terminal is damaged it shall be replaced. For repair of leads and cable terminals, Diagnostic Aids

Other
- Checking wiring and terminals Checking Wiring and Terminals. Permanent Faults

Continue - FAULT FOUND

-------------------------------------------------