Body - No Intermittent Folding Operation For Power Mirrors
Title: Power mirror, no or intermittent folding operationRef No US20549.1.2 en-GB
Issuer
Partner 3 US 7510 Volvo Cars North America
Func Group 8462
Func Desc electrical outside mirrors, compl
Status Released
Status Date 03-29-2012
Issue Date 03-23-2012
Reference VIDA
Attachment
Vehicle Type
CSC Customer Symptom Codes
DTC Diagnostic Trouble Codes
Text
CSC = Customer Symptom Code
DTC = Diagnostic Trouble Code
Note!
If using a printed copy of this Retailer Technical Journal, first check for the latest online version.
NOTE!
THIS DOCUMENT SUPERSEDES THE PREVIOUS RETAILER TECHNICAL JOURNAL *20549* DATED 2012-03-23. Added model 134-Updated vehicle model years. PLEASE UPDATE YOUR FILES.
DESCRIPTION:
If you have a case of no or intermittent folding function of the outer mirror, check the electrical connector towards the motor and the connector on the drivers door module (DDM)/Passenger door module (PDM).
SERVICE:
Carefully check the electrical connectors according to the attachment.
1) Orange connector towards motor: check if the connector is fully inserted (see attached).
If the orange connector is loose, use a drop of fast curing glue (PN 1161625) and fully insert the connector into position.
2) Green connector on DDM/PDM side: Open the connector and visually inspect for damages or corrosion.
Also verify the tension of the terminals by using PN/30656677 (square terminal, only to be used 20 times due to wear). Insert the connector in the terminals and pull out again, some tension must be felt (no loose connection).
VOLVO STANDARD TIMES GUIDE (VSTG) INFO:
OPERATION NUMBER: 99638-2 Power door mirror adjust.
C30,S40,V50 = 0.4
S60 = 0.6
S60 (11-)= 0.6
C70 = 0.8
V70 -06 = 0.6
V70 07- = 0.6
V70 = 0.6
S80 = 0.6
XC90 -06 = 0.5
XC90 07- = 0.6
- Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01
- Labor times are valid at the time of release and are subject to change.
To view TJ attachment, see illustrations under Service, Step 1.