Checking Automatic Angling of Door Mirrors When Parking
Checking automatic angling of door mirrors when parking
Checking manual operation
Use the manual controls to check that the relevant mirror reaches the bottom position, fully retracted.
Does manual operation work correctly?
No - Checking door mirrors
Yes - Downloading software
-------------------------------------------------
Checking door mirrors
Rectify in the following order:
- Rectify the mirrors so that manual operation is possible.
- Verify the function of the Automatic angling of the door mirrors when parking.
Hint: Activate Automatic angling of door mirrors when parking in the Infotainment control module (ICM) and engage reverse.
Other information:
Rear view mirror external Rear View Mirror External
Is the function OK?
Yes - FAULT FOUND
No - Downloading software
-------------------------------------------------
Downloading software
Download new software to the Driver door module (DDM).
Download new software to Passenger door module (PDM).
Choose Continue to proceed with the troubleshooting.
Continue - Programming door mirrors
-------------------------------------------------
Programming door mirrors
Click the VCT2000 symbol to begin the programming.
Choose Continue to proceed with the troubleshooting.
Continue - Positioning of the door mirrors
-------------------------------------------------
Positioning of the door mirrors
Activate Automatic angling of door mirrors when parking in the Infotainment control module (ICM) and engage reverse.
Correct position being searched and stored.
Note! This first positioning can take a while. Wait until both mirrors are completely still for a few seconds.
Choose Continue to proceed with the troubleshooting.
Continue - Verification
-------------------------------------------------
Verification
Verify by deactivating the function for the Automatic angling of the door mirrors when parking (via the Infotainment control module (ICM)).
Then check that the correct mirror positions are reached when the function is activated (activate the function Automatic angling of door mirror when parking in the Infotainment control module (ICM) and engage reverse).
Continue - FAULT FOUND
-------------------------------------------------