Mirrors, Auto Dim

Mirrors, auto dim























INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.






Mirrors, auto dim


Note! Some steps in these installation instructions are presented with illustration only.





- Set the ignition key to position 0.

Note! Wait at least one minute before unplugging the connectors or removing other electrical equipment.














- Disconnect any connector.







Applies to cars where the connector was not connected to the rear view mirror.





























- Locate the prerouted connector.

Applies to all models













- Plug in the connector
- Reinstall the detached components in reverse order.





- Download software (application) for the accessory's function
- Calibrate the compass. Information can be found in VIDA under:
- Repair
- Clean, check and adjust
- 8 Body and interior
- 88 Interior equipment
- 882 Interior equipment
- Interior equipment
- Compass calibration