Pinout Values and Diagnostic Parameters

Connecting the breakout box

Special tools:
951 3020 ICM adapter 951 3020 ICM Adapter

Caution! Avoid touching control module connector pins and corresponding cable harness connectors. There is a risk of electrostatic discharge, which could damage the control module. Relieve any charge on yourself and the tools to be used by holding the metal part of the tool and touching part of the body just before starting work.

General information
Visually check that the male and female pins of the connectors are not damaged and that the cables to the female pins are properly housed in the connections on the pins.
The breakout box is designed to facilitate reading off control module output and input signals when the control module is connected as well as resistance of cables and components when the control module is disconnected. Using a breakout box reduces the risk of unintentionally short-circuiting cables or damaging connector pins.

Connecting the breakout box
- Ignition off
- Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box to the adapter.

Infotainment control module (ICM)
- Connect adapter 951 3020 ICM adapter 951 3020 ICM Adapter to control module connector C1.
- For connector C1, #C1-#C1:16 correspond to #1-#16 on the breakout box.