FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Connecting the Breakout Box, Phone Module (PHM)






Connecting the breakout box

Special tools:
951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin
951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 Pin
951 1428 Breakout box 951 1428 Breakout Box
951 2888 16-pin AUD adapter 951 2888 16-Pin AUD Adapter

General information
Check that the male and female terminals on the connectors are undamaged and secure (cannot be pressed in). Check that the cables to the female terminals are secured on the terminal pins.
The breakout box is designed to facilitate the reading of control module input and output signals when the control module is connected as well as the resistance of cables and components when the control module is disconnected. Using the breakout box reduces the risk of unintentionally short-circuited cables or damaged connector pins.

Connecting the breakout box
- Ignition off
- Switch Volvo On Call Removal and Replacement
- Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box to the adapter.

Phone module (PHM)
- Connect adapter 951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin to the control module connector C1.
- Connect adapter 951 2888 16-pin AUD adapter 951 2888 16-Pin AUD Adapter to the control module connector C3.
- For connector C1, terminals #C1:1 - #C1:22 correspond to terminals #1 - #22 on the breakout box.
- For connector C3, terminals #C3:1 - #C3:6 correspond to terminals #21 - #26 on the breakout box.

Handset
- Connect adapter 951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 Pin to the handset connector.
- For the connector, #1-#5 correspond to #22-#26 on the breakout box.

SIM card holder
- Connect adapter 951 2888 16-pin AUD adapter 951 2888 16-Pin AUD Adapter to the SIM card holder connector.
- Terminals #1-#6 on the connector correspond to terminals #21-#26 on the breakout box.

Switch Volvo On Call
- Connect adapter 951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 Pin to the connector for the switches.
- Terminals #1-#7 on the connector correspond to terminals #13-#19 on the breakout box.