Fault-Tracing Information

Fault-tracing

Fault-tracing information

Note! This trouble code is only relevant for troubleshooting and action in the following cases:

- The trouble code is active in the present driving cycle and has been active for a longer period of time.
- The customer experiences malfunction that can be attributed to the trouble code.
In other cases, the DTC does not indicate a fault and must therefore be ignored and only erased.

Do you want to continue fault-tracing?

Yes - Checking the wiring and terminals

No - DONE

-------------------------------------------------

Checking the wiring and terminals




- Ignition off, wait for 15 seconds.
Check the charging function of the generator (GEN).
Check the battery voltage.
Remedy as necessary.

Other information
- Signal specification Signal Specification, Parking Assistance Camera (PAC)
- For further information, see the wiring diagram.
- Fault-tracing and testing the battery Fault-Tracing and Testing the Battery
- Checking the power supply and ground terminal Checking Supply Voltage/Ground Terminal, Parking Assistance Camera (PAC)
- Parking Aid Camera Module Parking Aid Camera Module
- Checking wiring and terminals Checking Wiring and Terminals. Permanent Faults

Continue - Information

-------------------------------------------------

Information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the wiring and terminals

-------------------------------------------------