Fault-Tracing Information

Fault-tracing

Fault-tracing information

Note! This trouble code is only relevant for troubleshooting and action in the following cases:

- The trouble code is active in the present driving cycle and has been active for a longer period of time.
- The customer experiences malfunction that can be attributed to the trouble code.
In other cases, the DTC does not indicate a fault and must therefore be ignored and only erased.

Do you want to continue fault-tracing?

Yes - Checking the wiring and terminals

No - DONE

-------------------------------------------------

Checking the wiring and terminals
Check the battery voltage.
Check the Closing velocity module (CVM) power supply and earth connection.
Check fuses.
Check voltage feed and ground connection for Central electronic module (CEM).

Other information
- Connecting the breakout box, Closing velocity module (CVM) Connecting the Breakout Box, Closing Velocity Module (CVM)
- Signal description, Closing velocity module (CVM) Signal Description, Closing Velocity Module (CVM)
- Fault-tracing and testing the battery Fault-Tracing and Testing the Battery
- Checking wiring and terminals Checking Wiring and Terminals. Permanent Faults

Continue - DONE

-------------------------------------------------