Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAC-U300317

Condition
Parking Assistance Camera (PAC) continuously checks its own system voltage.
The diagnostic trouble code is stored if the control module detects:
- The local voltage is 10% lower than the system voltage in Central electronic module (CEM).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Loose connection or oxidation in the connections.
- Open circuit or short-circuiting on cables.
- Damaged Parking Assistance Camera (PAC).

Fault symptom[s]
- Park assist camera/Does not work