Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PBM-U300029

Condition
Park Brake Module (PBM) checks information from the internal angle sensor.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The value from the angle sensor is outside the permitted interval.
- Incorrect value lasts longer than 5 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position 0, I and II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Incorrectly installed control module.
- Damaged Park Brake Module (PBM).

Fault symptom[s]
- Message in information display
- Electrical parking brake; Reduced Functionality