Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DIM-U210207

Condition
At the bottom of the Driver information module (DIM) there is a button that adjusts the time and resets the odometer.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The button is damaged.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power for at least 2 minutes.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Damaged button.

Fault symptom[s]
- Clock adjustment; No functionality