Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAC-U210100

Condition
The parking assistance camera module (PAC) compares its configuration with the vehicle configuration stored in the central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The control module's configuration does not correspond with the vehicle's vehicle configuration.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
- Reverse gear is engaged.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Software missing/wrong software in Parking Assistance Camera (PAC).
- The vehicle's vehicle configuration file is incorrect.

Fault symptom[s]
- Park assist camera/Does not work