Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAC-U210000

Condition
The Parking Aid Camera Module (PAC) receives information about the current vehicle configuration from the Central electronic module (CEM).

The diagnostic trouble code (DTC) is stored if the control module detects that:
- Vehicle configuration from central electronic module (CEM) is lost.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
- Reverse gear is engaged.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Fault-trace in transmitting control module.

Fault symptom[s]
- Park assist camera/Does not work