Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-U201F87

Condition
The control module checks the communication with the receiver.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Interrupted or no communication with Remote Keyless Entry (RKE).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Communication with the receiver.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Internal fault in Remote Keyless Entry (RKE).
- Internal error in Keyless vehicle module (KVM).

Fault symptom[s]
- Cannot be operated by remote control
- No keyless functionality