Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-U201B54

Condition
The Keyless vehicle module (KVM) checks for a lock configuration file.
The diagnostic trouble code is stored if the control module detects:
- Missing or incorrect configuration file.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- The standard values are used.

Possible source
- Incorrect configuration file in the Keyless vehicle module (KVM).
- Local configuration file missing in the Keyless vehicle module (KVM).

Fault symptom[s]
- Locking/unlocking/Central locking does not work
- Starting/Engine does not start/Engine does not turn/Unsure when/at all times