Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
At start-up the Suspension module (SUM) retrieves basic information from a program and data memory.
The control module monitors read off from the memory.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- An internal memory error has occurred.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.
- The test is carried out every other operating cycle. The Suspension module (SUM) defines an operating cycle as ignition on and ignition off.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Deactivated Four-C function.

Possible source
- Internal memory fault in the Suspension module (SUM).

Fault symptom[s]
- Message in information display
- Four-C function not working