Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The Driver/Passenger door module (DDM/PDM) checks the lighting in the control panels.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The current strength is too low on the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.
- Command from the control module to light the switch indication.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Open circuit or short circuit to battery voltage.
- Contact resistance, oxidation or poor contact in connections.

Fault symptom[s]
- Switch indication/Does not work